Hot Tubs Run All the Time

Hot tub owners have two options when it comes to keeping their tubs clean: they can run the pump all the time or schedule the filtration cycle to run every few hours. Typically, the pump kicks on when the water temperature drops below a set temperature, depending on the hot tub’s insulation and ambient air temperature. Many people choose to run their pumps every two hours, and others choose to limit the circulation cycle to a couple of hours a day.

While it may be tempting to leave the hot tubs near me running constantly, this is not the ideal situation. Most hot tubs come with an electronic control panel that shows the water temperature. You can easily increase or lower the temperature of the water by pressing the appropriate buttons on the control panel. The buttons should be clearly marked, and usually bear a plus and minus symbol.

By putting your confidence in us, you can be sure that you are putting your trust in a business that does everything you need. We are partnered with leading global suppliers, Aspel UK Ltd, Regency Garden Buildings and Vitavia Greenhouses, in order to provide an extensive range of the very best hot tubs, garden buildings and greenhouses your money can buy. And if you’re looking for something bespoke, we build to meet your specifications.

Some hot tub owners use hot tub covers to avoid unnecessary energy usage. A cover can prevent unnecessary water evaporation, and it also helps maintain the correct temperature. A six-person hot tub holds about 300 to 500 gallons of water, so a cover can minimize energy usage. However, remember that a hot tub will need to be heated up for the first time, and it can take up to 20 hours for the water to reach this temperature.

Should Hot Tubs Run All the Time?

Some hot tub owners choose to use a “summer mode” feature that shuts off the circulation pump and filters to save on energy. However, this is not recommended for use in the winter months, when water circulation is critical to maintain an even temperature in the hot tub. Another option to save money is to set the hot tub down while not in use.

While some people would prefer to have their hot tubs run all day, this is not the best option. Most hot tubs use very little electricity when they are not in use. That way, they use electricity only when the temperature drops. This also means that the hot tub stays warm and ready for use when you want to relax.

Sometimes, hot tubs have a timer or automatic settings. Analogue timers allow you to set a certain period of time, but they will automatically shut off the circulation pump and heating mechanism once the timer is over. If the timers are set incorrectly, this can cause the pump to run all the time. In such cases, you should contact a professional electrician.

Some people argue that hot tubs should be run all the time, but in reality, the temperature of the water should be kept at five degrees lower than it normally operates. This lowers the amount of energy needed to maintain the desired temperature and prevents bacteria from growing in the water. In addition, running the hot tub keeps the water sanitized and filters. There are even pump timers that you can program to run high speed circulation for a certain period of time a day.